What is the oil capacity of the 2009 Toyota Tundra?

4.0 L V6 (1GR-FE) engine: 5.5 qt (with filter); 4.7 L V8 (2UZ-FE) engine: 6.6 qt (with filter); 5.7 L V8 (3UR-FE, 3UR-FBE) engine: 7.4 qt (with filter); 4.0 L V6 (1GR-FE) engine: 5.2 qt (without filter); 4.7 L V8 (2UZ-FE) engine: 6.0 qt (without filter); 5.7 L V8 (3UR-FE, 3UR-FBE) engine: 6.9 qt (without filter). Source: 2009 Toyota Tundra Owner's Manual.

2009 Toyota Tundra Oil Capacity

2009 Toyota Tundra oil capacity: 5.5 qt (4.0 L V6 (1GR-FE) engine) or 6.6 qt (4.7 L V8 (2UZ-FE) engine) or 7.4 qt (5.7 L V8 (3UR-FE, 3UR-FBE) engine) with…

Change year

Depends on your engine. Choose yours, or compare them here.

4.0 L V6 (1GR-FE) engine 5.5 qt with filter·5.2 qt without filter
4.7 L V8 (2UZ-FE) engine 6.6 qt with filter·6.0 qt without filter
5.7 L V8 (3UR-FE, 3UR-FBE) engine 7.4 qt with filter·6.9 qt without filter

2009 Toyota Tundra Owner's Manual, PDF pages 607 and 608

5.5 qt. (5.2 L, 4.6 Imp.qt.)Open the manual at this page ↗Added Oct 24, 2026 · Updated Oct 26, 2026

See where it's printed

Oil capacity (with filter) · 4.0 L V6 (1GR-FE) engine · PDF page 607
5.5 qt. (5.2 L, 4.6 Imp.qt.)

Oil capacity (without filter) · 4.0 L V6 (1GR-FE) engine · PDF page 607
5.2 qt. (4.9 L, 4.3 Imp. qt.)

Oil capacity (with filter) · 4.7 L V8 (2UZ-FE) engine · PDF page 607
6.6 qt. (6.2 L, 5.5 Imp.qt.)

Oil capacity (without filter) · 4.7 L V8 (2UZ-FE) engine · PDF page 607
6.0 qt. (5.7 L, 5.0 Imp. qt.)

Oil capacity (with filter) · 5.7 L V8 (3UR-FE, 3UR-FBE) engine · PDF page 608
7.4 qt. (7.0 L, 6.2 Imp.qt.)

Oil capacity (without filter) · 5.7 L V8 (3UR-FE, 3UR-FBE) engine · PDF page 608
6.9 qt. (6.6 L, 5.8 Imp.qt.)

Oil type SAE 5W-30 / SAE 5W-20 or 0W-20 Which one is yours →

All versions

6 values

Applies to	Value	Manual says	Page
4.0 L V6 (1GR-FE) engine	5.5 qtwith filter	“5.5 qt. (5.2 L, 4.6 Imp.qt.)”	PDF page 607 ↗
4.0 L V6 (1GR-FE) engine	5.2 qtwithout filter	“5.2 qt. (4.9 L, 4.3 Imp. qt.)”	PDF page 607 ↗
4.7 L V8 (2UZ-FE) engine	6.6 qtwith filter	“6.6 qt. (6.2 L, 5.5 Imp.qt.)”	PDF page 607 ↗
4.7 L V8 (2UZ-FE) engine	6.0 qtwithout filter	“6.0 qt. (5.7 L, 5.0 Imp. qt.)”	PDF page 607 ↗
5.7 L V8 (3UR-FE, 3UR-FBE) engine	7.4 qtwith filter	“7.4 qt. (7.0 L, 6.2 Imp.qt.)”	PDF page 608 ↗
5.7 L V8 (3UR-FE, 3UR-FBE) engine	6.9 qtwithout filter	“6.9 qt. (6.6 L, 5.8 Imp.qt.)”	PDF page 608 ↗

Scroll the table to see the quote and page →

Check the level before you drive

Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.

A quick level check, not a full oil-change guide. Follow your manual's procedure.

Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →

Original sourcePDF pages 607 and 608

2009 Toyota Tundra Owner's Manual