2014 Toyota Tundra Oil Capacity
2014 Toyota Tundra oil capacity: 6.4 qt (1GR-FE engine) or 7.9 qt (1UR-FE, 3UR-FE and 3UR-FBE engines) with filter. Oil type: 0W-20.
Depends on your engine. Choose yours, or compare them here.
- 1GR-FE engine 6.4 qt with filter·5.9 qt without filter
- 1UR-FE, 3UR-FE and 3UR-FBE engines 7.9 qt with filter·7.5 qt without filter
6.4qt
With filter · 1GR-FE engine
- Without filter5.9 qt
7.9qt
With filter · 1UR-FE, 3UR-FE and 3UR-FBE engines
- Without filter7.5 qt
2014 Toyota Tundra Owner's Manual, PDF page 508
6.4 qt. (6.1 L, 5.4 Imp.qt.)Open the manual at this page ↗Added Oct 24, 2026 · Updated
See where it's printed
Oil capacity (with filter) · 1GR-FE engine · PDF page 508
6.4 qt. (6.1 L, 5.4 Imp.qt.)
Oil capacity (without filter) · 1GR-FE engine · PDF page 508
5.9 qt. (5.6 L, 4.9 Imp.qt.)
Oil capacity (with filter) · 1UR-FE, 3UR-FE and 3UR-FBE engines · PDF page 508
7.9 qt. (7.5 L, 6.6 Imp.qt.)
Oil capacity (without filter) · 1UR-FE, 3UR-FE and 3UR-FBE engines · PDF page 508
7.5 qt. (7.1 L, 6.2 Imp.qt.)
2014 Toyota Tundra Owner's Manual, PDF page 508
6.4 qt. (6.1 L, 5.4 Imp.qt.)Open the manual at this page ↗Added Oct 24, 2026 · Updated
See where it's printed
Oil capacity (with filter) · 1GR-FE engine · PDF page 508
6.4 qt. (6.1 L, 5.4 Imp.qt.)
Oil capacity (without filter) · 1GR-FE engine · PDF page 508
5.9 qt. (5.6 L, 4.9 Imp.qt.)
2014 Toyota Tundra Owner's Manual, PDF page 508
7.9 qt. (7.5 L, 6.6 Imp.qt.)Open the manual at this page ↗Added Oct 24, 2026 · Updated
See where it's printed
Oil capacity (with filter) · 1UR-FE, 3UR-FE and 3UR-FBE engines · PDF page 508
7.9 qt. (7.5 L, 6.6 Imp.qt.)
Oil capacity (without filter) · 1UR-FE, 3UR-FE and 3UR-FBE engines · PDF page 508
7.5 qt. (7.1 L, 6.2 Imp.qt.)
Oil type SAE 0W-20 Details →
See every quote (4 values)
All versions
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| 1GR-FE engine | 6.4 qtwith filter | “6.4 qt. (6.1 L, 5.4 Imp.qt.)” | PDF page 508 ↗ |
| 1GR-FE engine | 5.9 qtwithout filter | “5.9 qt. (5.6 L, 4.9 Imp.qt.)” | PDF page 508 ↗ |
| 1UR-FE, 3UR-FE and 3UR-FBE engines | 7.9 qtwith filter | “7.9 qt. (7.5 L, 6.6 Imp.qt.)” | PDF page 508 ↗ |
| 1UR-FE, 3UR-FE and 3UR-FBE engines | 7.5 qtwithout filter | “7.5 qt. (7.1 L, 6.2 Imp.qt.)” | PDF page 508 ↗ |
Scroll the table to see the quote and page →
Check the level before you drive
- Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
- Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
- Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
- Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.
A quick level check, not a full oil-change guide. Follow your manual's procedure.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →