CAR SPEC SHEET

2009 Toyota Tundra Lug Nut Torque

2009 Toyota Tundra lug nut torque: 154 ft·lbf (Steel wheels, all types) or 97 ft·lbf (Aluminum wheels, all types). From the owner's manual, PDF page 615.

Change year

Depends on your version. Choose yours, or compare them here.

  • Steel wheels, all types 154 ft·lbf
  • Aluminum wheels, all types 97 ft·lbf

2009 Toyota Tundra Owner's Manual, PDF page 615

154 ft·lbf (209 N·m, 21.3 kgf·m)Open the manual at this page ↗Added Oct 24, 2026 · Updated
See where it's printed

Lug nut torque · Steel wheels, all types · PDF page 615

154 ft·lbf (209 N·m, 21.3 kgf·m)

Lug nut torque · Aluminum wheels, all types · PDF page 615

97 ft·lbf (131 N·m, 13.4 kgf·m)

See every quote (2 values)

All versions

2 values
Applies toValueManual saysPage
Steel wheels, all types 154 ft·lbf “154 ft·lbf (209 N·m, 21.3 kgf·m)” PDF page 615 ↗
Aluminum wheels, all types 97 ft·lbf “97 ft·lbf (131 N·m, 13.4 kgf·m)” PDF page 615 ↗

Scroll the table to see the quote and page →

Tools for this job

Tool for this jobTorque wrench (1/2-inch drive)
Shop on Amazon

Search links. Check the listing matches your vehicle and version. As an Amazon Associate we earn from qualifying purchases.

Tightening wheel nuts

  1. Snug every nut by hand first. With the wheel still lifted, thread each nut on evenly.
  2. Lower the car and torque in a star pattern. Use a torque wrench set to the value above, working across the wheel.
  3. Recheck after a short drive. Your manual may give a re-torque interval.

Impact guns can over-tighten nuts. Finish with a torque wrench.

Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →