2015 Toyota Tundra Oil Capacity
2015 Toyota Tundra oil capacity: 7.9 qt with a filter change (1UR-FE, 3UR-FE and 3UR-FBE engines). Oil type: 0W-20. From the owner's manual, PDF page 512.
7.9qt
With filter · 1UR-FE, 3UR-FE and 3UR-FBE engines
- Without filter7.5 qt
2015 Toyota Tundra Owner's Manual, PDF page 512
7.9 qt. (7.5 L, 6.6 Imp.qt.)Open the manual at this page ↗Added Oct 24, 2026 · Updated
See where it's printed
Oil capacity (with filter) · 1UR-FE, 3UR-FE and 3UR-FBE engines · PDF page 512
7.9 qt. (7.5 L, 6.6 Imp.qt.)
Oil capacity (without filter) · 1UR-FE, 3UR-FE and 3UR-FBE engines · PDF page 512
7.5 qt. (7.1 L, 6.2 Imp.qt.)
Oil type SAE 0W-20 Details →
See every quote (2 values)
As printed in the manual
| Applies to | Value | Manual says | Page |
|---|---|---|---|
| 1UR-FE, 3UR-FE and 3UR-FBE engines | 7.9 qtwith filter | “7.9 qt. (7.5 L, 6.6 Imp.qt.)” | PDF page 512 ↗ |
| 1UR-FE, 3UR-FE and 3UR-FBE engines | 7.5 qtwithout filter | “7.5 qt. (7.1 L, 6.2 Imp.qt.)” | PDF page 512 ↗ |
Scroll the table to see the quote and page →
Check the level before you drive
- Park on level ground. Turn off the engine and follow the waiting period in your owner's manual.
- Pull, wipe, and reinsert the dipstick. Use a clean cloth, then push the dipstick all the way back in.
- Read the level between the marks. Pull it out again. The oil should sit between the upper and lower marks.
- Top up a little at a time, then recheck. Use the specified oil. Don't fill above the upper mark.
A quick level check, not a full oil-change guide. Follow your manual's procedure.
Confirm with your own manual, dipstick or door-jamb label.
Report a problem with this page →